Start
References
These are the outside sources the docs cite. They are leads and comparison material, never authority over what a unit actually shows. Anything taken from a peer project is labelled External (evidence levels) until it is observed on our own unit.
Datasheets and filings#
| Source | Used for |
|---|---|
| GD25Q64E datasheet | PLAF103 external flash (device) |
| FCC 2A3DEPLAF103S internal photos | Board comparison; shows PLAF103 MB V1.0 |
| TC118AH datasheet (S&CIC2102 v1.1) | PLAF103 motor driver (motor driver); kept in ignored private/references/ |
| Realtek AmebaD SDK | Pinned under src/firmware/vendor/ |
Peer projects#
Other people's work on PETLIBRO devices. Different models, different units, and different evidence standards: check a claim on your own unit before relying on it.
| Project | Model | What it offers |
|---|---|---|
| earlynerd/Petlibro-One-Custom-Firmware | AF301 (mainboard PLNF301), RTL8721DM | A bench-mapped GPIO table for the QFN68 package, RFID Modbus protocol, custom AmebaD firmware |
| taylorfinnell/petlibro-esphome | PLAF108, PLWF105 (ESP-based) | ESPHome replacement firmware and backup steps |
| Dr-Crow/plaf203 | PLAF203 (Linux, camera) | Root access, boot flow and filesystem notes |
| jjjonesjr33/petlibro | Cloud API, many models | Home Assistant integration over the vendor cloud |
Documentation models#
Projects whose layout these docs follow: Asahi Linux docs (per-block hardware pages, feature-support tables), LibreTiny (per-chip and per-board pages, dumping and partition layouts), and Valetudo (supported-device lists, rooting and recovery pages).